Quadro6L/4L/2x2 Manual I: Installation Guide
Step 2-B: Using Key System Emulation
Quadro6L/4L/2x2; (SW Version 5.3.x and higher)
38
Fig. l- 34: Key System Emulation page
To activate an SLA line, assign FXO lines or SIP number to the SLA lines and configure the
IP phone’s programmable buttons.
For how to use SLA lines for SIP calls, see the section below.
To configure the IP phones to use the Key System Emulation service of the Quadro, the
programmable keys should be adjusted correspondingly. To do so, go to the Telephony
menu,
Line Settings
, move to the
IP Line Settings
page. If the IP Line is already confi-
gured, push the
Advanced
link for the corresponding IP line in the
Details
column, other-
wise configure the IP line first as indicated in the chapter
Step 2-A: Using IP Lines
.
The
Advanced
link leads you to the
Programmable Keys Configuration
page where pro-
grammable keys for the corresponding IP phone can be configured. Assign the SLA line to
the preferred Programmable Key and save the settings. Once the corresponding IP phone
is restarted, the selected programmable key will be responsible for the calls on the confi-
gured SLA line. The corresponding programmable key will be blinking during incoming calls
on that SLA line. To make an outgoing call, the caller will simply need to push that pro-
grammable key to get access to the FXO line (in default configuration, as indicated above).
The
Advanced Configuration
link moves to the
Advanced Configuration
page that is
used to enable/disable the blind transfer service from SLA lines to extensions or their voice
mailboxes.
Please Note:
By assigning the FXO line to the SLA line, it becomes unavailable for calls
through Auto Attendant or Call Routing Table. If you wish to leave FXO line(s) available for
calls through the Auto Attendant or Call Routing Table, go to the
Key System Emulation
page from the
Telephony
menu, push the SLA line to which the corresponding FXO
(PSTN) line is assigned, choose the
Inactive
option or change the SLA assignment to a
SIP server. Now the corresponding PSTN line is not used in the Key System Emulation and
is available for regular PSTN calls.
Configuring SLA Lines
You may want to use the SLA lines of the Key System Emulation for SIP calls through cer-
tain SIP servers instead of assigning them to the PSTN lines. To do so, go to the
Key Sys-
Summary of Contents for Quadro2x2
Page 1: ......
