STEP 4
STEP 5
Align each corner of the Tie down strap bracket to the appropriate holes of the box. (FIG 11) Using four (4) M6 x
15mm Hex bolts with flat washers and M6 nylon nuts, secure Tie down strap bracket to the box. Repeat process on
the other side of box. An allen key or 4mm hex drive and a 10mm wrench are the appropriate tools. (FIG 12)
Four (4) M8 x 40mm hex bolts with black flat washers and spacers will be used to secure brackets to the floor. A T-30
security torx bit is the appropriate tool (FIG 7 and 8) Four (4) M10 x 20mm hex bolts with or without spacer and M8
nylon nuts will be used to secure brackets to the Quadratec Trail and Tool Storage box. A T-30 security torx bit and a
13mm wrench is the appropriate tool. (FIG 10)
Note
Note
:: If mounting in the forward most position using bracket letter “O”, the bracket mouting hardware to the box is the
M6x15mm torx head bolt. The allen key or 4mm hex drive and a 10mm wrench are the appropriate tools.
4
FIG 7
FIG 8
FIG 9
FIG 10
FIG 11
FIG 12
Note:
The Tie down strap bracket secured to both sides
of the outer box, will allow you to secure items on top of
the Quadratec Trail and Tool Storage box. (FIG 13)
FIG 13
