STEP 1
STEP 2
FIG 1
FIG 2
Put on safety glasses. The Quadratec Trail and Tool Storage box has the ability to be mounted in two locations in the
rear of the cargo area, a forward or rear location. After choosing a mounting location, remove bolts and anchors at
each of the four (4) chosen mounting locations with a T-30 torx bit. (FIG 2)
Note
: Save this hardware. If you ever need to remove the Quadratec Trail and Tool Storage box for any reason, you will
need to reinstall these tie down points.
FIG 3
Set Quadratec Trail and Tool Storage box into cargo area at the desired location. (FIG 3) Align storage box with the
respective cargo floor mounting points and the corresponding mounting holes on the side of the Quadratec Trail and
Tool Storage box. (Fig 4) is a depiction of the forward most mounting. Align and secure using appropriate brackets,
spacers, tools, and hardware.
STEP 3
FIG 6
To mount box in the rear most position (by tailgate), you will need to use the brackets lettered “L and N” of the kit
content list on either side of the box. You will also be using four (4) spacers lettered “I” with kit content list letter “N”
on either side of the box. (FIG 5) To mount box in the forward most position (behind seat), you will need to use
brackets lettered “N and O” of the kit content list on either side of the box. (FIG 6) You will also be using four (4)
spacers lettered “I” with kit content list letter “N” on either side of the box.
FIG 4
3
FIG 5
