11
7033-353G
08/21
Figure 11.1
Figure 11.2
HIGH
MED
LOW
Burn Rate
Air Control
Start-Up
Air Control
Manual
Timer (ACC)
Shut Down
Pull Forward
to Shut Down
E. Using Burn Rate Air Control & ACC System
Injury Risk.
• Gloves recommended
CAUTION
1. Start up and Reloading Fuel
Open both Burn Rate Air Control and ACC systems fully. To
do this with the Burn Rate Air Controls push spring handle
up to high. For the ACC timer system push knob towards
back of appliance until the knob is located under the high
position (
Figure 11.1).
2. Maximize Heat with The ACC System
To maximize heat output with the ACC timer System or also
known as high burn push the ACC Air Control lever towards
the back of the appliance and leave. This combined with
having the main burn rate control lever pushed up will
deliver the most amount of air needed to achieve the
highest amount of heat output (
Figure 11.1).
3. Manual Timer Over-Ride
If you need to shut the ACC system off before it goes
through the cycle of shutting itself off; 25 minutes, reach
towards the back of the appliance on the right side and pull
the lever towards the front of the appliance (
Figure 11.2).
