25
7033-353G
08/21
Figure 25.5
Figure 25.1
F. Decorative Panel Removal & Installation
Left Side Panel Service Part: SRV7033-082
Right Side Panel Service Part: SRV7033-080
Tile Frame Service Part: SRV7033-324
Blank Frame Service Part: SRV7033-346
Your appliance ships with two different side options, one
is a solid side panel
(Figure 25.1)
and tile side panel
(Figure 25.2)
. There are two of each and no left or right
side, these can be changed at anytime.
1
Figure 25.4
3
Figure 25.2
NOTE:
300 degree F high temp paint can be use to
repaint the solid side panel only! DO NOT use on
the rest of appliance this requires 1200 degree F
high temp paint.
Tile Panel Installation
2.
Remove tile frame from side by lifting up and pulling
away from appliance.
Figure 25.3 reference solid
side panel removal.
3.
Stack non-combustible material tiles in tile frame as
shown in
Figure 25.2.
4. Reattach tile frame
(Figure 25.4)
.
WARNING
Fire Risk.
Use only noncombustible materials as a
decorative tile.
The appliances are being shipped with a solid side panel
securing clip on both sides. Please remove and discard
pins prior to use
(Figures 25.3)
.
Tile Dimensional Requirements:
Max Thickness: 5/16”
Max Length/Width: 11-7/8” square
Min Length/Width: 11-11/16” square
Figure 25.3
Securing
Clip
Solid Side Panel Removal
1.
Remove solid panel from side by lifting up and pulling
away from appliance (use a flat tool to pry from bottom
if needed)
(Figure 25.4).
