Page 24
7047-148C
December 20, 2011
R
51I ACC Wood Insert
Figure 24.3 - Door Handle for Arched Door
Locknut
Door Cross Section
(example)
Latch Cam
Spacing
Washers
Square Key
Door Handle
Spring
Handle
F. Baffle Removal
1. Remove all ash from the firebox, and extinguish all hot
embers before disposal into a metal container.
2. The baffle board has 2 pieces. With the ceramic blanket
still in place, slide one baffle piece over the top of other one
but still keep it all components inside the firebox.
Figure
24.1.
3. It is easier to remove both baffle boards and ceramic
blanket after the tube channel assembly has been partially
disassembled. Follow steps 1 through 4 on
page 25
for
removal of the tube channel assembly. It is not necessary
to completely remove the tube channel assembly.
4. Re-install in reverse order. Be sure the baffle boards and
ceramic blanket are in their proper positions.
Figure 24.2.
G.
Door Handle Assembly
1. Install washer on door handle shaft.
2. Slide door handle through door.
3. Install second washer(s) as shown in
Figure 24.3.
4. Install key in groove.
5. Align groove in latch cam with key; slide latch cam over
shaft
6. Install locknut but do not overtighten, the handle needs
to move smoothly.
7. Install handle turning in a counter-clockwise motion to
desired location on door handle rod.
Figure 24.3.
CAUTION! Do not overtighten lock nut. The door handle
needs to move smoothly.
Baffle
Baffle
Ceramic Blanket
The ceramic blanket and both baffle boards
and tube channel assembly can all be
removed at the same time.
Figure 24.1
Figure 24.2
