20
7045-910
October 14, 2013
41I-ACC
Figure 20.1
Figure 20.2
Relocating Blower Cord to Left Side
1. Remove the convection blower housing from the appli-
ance by removing two 5/32 allen head bolts.
2. Remove Blower assembly from appliance by remov-
ing two 8/32 phillips head screws located under ashlip.
Figure 20.1.
3. Using phillips head screw driver, remove snap disc
bracket and cord restraint bracket from right side.
Figure
20.2
4. Re-install snap disc bracket and cord restraint bracket to
left side of blower housing.
Figure 20.3.
5. Re-install blower housing and blower assembly in reverse
order.
F. Blower Cord Installation on Left Side
The blower cord is shipped on the right side of the appli
-
ance. You may relocate the cord so it is on the left side.
5/32 Allen Bolts
(x2)
8/32 screws
(x2)
Blower Housing
Blower Assembly