Quadlogic RSM-5, Installation Manual

Page: 22 / 33

© COPYRIGHT
2008 www.quadlogic.com
© COPYRIGHT
2008 www.quadlogic.com
Release Dates
Notable Revision History
Preventive Maintenance
Preventative maintenance is not required.
Use a soft dry cloth to clean the meter.
A Toshiba CR2032 coin battery is used in each device ONLY for the clock when
power is lost, and is intended to be good for decades before replacement. The
meter does not rely on the battery, and the meter data is stored in non-volatile
FLASH memory.
Miscellaneous
Chapter
10
MANUAL
35
QLC PART NO. REVISION NO. RELEASE DATE
RSM-5c and RSM-5
Installation Manual
RSM5/5c MANR1.1.R 1.1.R 1.2.07
RSM-5c kit and RSM-5 kit
Installation Manual
RSM5/5c MANR1.0.R 1.0.R 11.17.06
(1)
(2)
RSM-5c and RSM-5
Installation Manual
RSM5/5c MANR1.2.R 1.2.R 6.19.07
(3)
1/2/7
6/18/07
10/28/08
• Pulse Datalogger functions during power loss event s
• Requirements for conduit siz e
• Main menu navigates forward only
• Separated table 7-1 into two tables for 0.1 AMP multipliers and
5 AMP multipliers
• Included catalog numbers for referenc e
• Corrected heading to RSM-5 Three-Phase Meters
• Updated: Quadlogic new address/copyright 200
7
• Inserted table of maximum lead lengt h
• Added clarifying not e
• Correction of memory size to 512 kilobyte
• Meets ANSI C12.
1
• Correction of voltage to 480V (Delta)
• Qualified fuse type
• Use shielded, twisted pair for 50' + CT extension
s
• Deleted amperage designation where not necessary
• Added RSM-5 "2 in 1" : diagram and model numbers
• Added NEMA enclosur
e
• Corrected amperage to 100 and 200
• Corrected chart to indicate "kWh & Demand" where applicable
1
3
9
17
29
(preface page)
5
8
20
21
26
4
5
6
9, 28
23
26
27 & 28
DATE PAGE DESCRIPTION
Chapter 10
-Miscellaneous -
36
Product Limited Warranty
Quadlogic Controls Corporation warrants its equipment for 3 years from
the ship date against defects in material or workmanship when installed in
accordance with manufacturer’s instructions by qualified personnel.
This warranty does not cover installation, removal, reinstallation or labor costs
and excludes normal wear and tear. The warranty does not cover product
which has been altered from its original manufactured condition due to faulty
installation, tampering, accident, neglect, abuse, force majeure or abnormal
conditions of operation.
Obligation under this warranty is limited to repair and/or replacement, at
Quadlogic’s option, of the manufactured product and in no event shall Quadlogic
be liable for consequential or incidental damages.
RSM-5c and RSM-5
Installation Manual
RSM5/5c MANR2.0.R 2.0.R 10/27/08
(4)