Quaddrix QT-500-16 User Manual Download Page 5

Page: 5 / 128

OggVorbis compression and bitrate is 16Kbps.

QT-500-8 doesn’t

have audio inputs.

Compressed video and audio are synchronous. You can select
either mixed stream or only video stream.

Support video loop.

Support CIF and QCIF resolution.

Support multi area motion detection.

Support OSD and changeable OSD position.

Local functions

Record

Support multiple record type, including real time, manual record,
motion detection, external alarm, motion&alarm, motion|alarm.

Support max. 4 IDE HDDs and each HDD can max support 2000GB.

Support FAT32 file system.

Support HDD S.M.A.R.T technology.

Support cycle or none cycle record.

Support backup the recorded files and clips. Support USB memory,
USB HDD, USB CD-R/W, USB DVD-R/W, IDE CD-R/W and IDE
DVD-R/W.

Preview and playback

Support analog monitor and VGA output.

Support multiple preview modes.

Support sensitive area mask.

Support camera spiteful block alarm.

Support one channel play back by files or by time.

Display local record status.

PTZ

Support many kinds of PTZ protocol.

Support preset, sequence and cruise.

Alarms

Support exception alarm, motion detection alarm, external alarm,

Summary of Contents for QT-500-16

































































































































Search results

Summary of Contents for QT-500-16

Reviews:

Related manuals for QT-500-16

Brands by name

Popular brands

Quaddrix QT-500-16, User Manual

Search results

Summary of Contents for QT-500-16

Reviews:

Related manuals for QT-500-16

Brands by name

Popular brands