4.8 Shut Down DVR
Note: Do not switch off the power directly in case of damaging
HDD. The correct step is using “Power Off” in the “Utilities” menu,
or
[
POWER
]
key on the front panel or on IR Remote Controller.
Shut down DVR normally
Use menu
Enter into “Utilities” menu, move “Active Frame” to “Power Off” button
and enter into power off dialog, press “Confirm” to shut down the DVR.
Use [POWER] key of front panel or IR Remote Controller
Press [POWER] key for above 3 seconds.
In preview mode, a login dialog will pop-up, select user name and input
password, press [Enter] to enter into power off dialog and press “Confirm”
to shut down DVR. If you input error password for three times, DVR will
return preview mode.
In menu mode, if the user has “Utilities” right, you can enter into power
off dialog, press “Confirm” to shut down DVR. Otherwise, the user can not
shut down DVR.
If DVR is shut down correctly, the [POWER] lamp is in red.
Note: When message of “Shut down…” is appeared, please do not press
[POWER] key any more, otherwise, DVR can not be shut down.
Summary of Contents for QT-500-16
Page 92: ......
Page 101: ......
Page 115: ...firmware file are setup and run correctly After upgrade finished press any key to reboot DVR ...
