manualshive.com logo in svg

Quaddrix QT-500-16, User Manual

Share
Download
Quaddrix QT-500-16 User Manual Download Page 36

 
 

difference for actual play speed. 
 
 

Exit playback 

 

In playback interface, press [ESC] key to enter into preview mode. 
In playback interface, press [MENU] key to enter into main menu, press 
[REC] key to enter into manual record, and press [PTZ] key to enter into 
PTZ control mode.  
 

4.7 Backup Recorded Files 

Note: The user must have “Playback” right. Please connect with 
backup devices before you start to backup.  

 
In the playback interface, you can backup the recorded files.  
In the preview mode, press [PLAY] key, in the login dialog, select 
username and input the correct password, you can enter into the playback 
interface. 
In the menu mode, just press [PLAY] key, you can enter into playback 
interface directly.  
 

Backup intraday recorded files

 

 

In the playback interface, move “Active Frame” to “

Backup Today

” 

button, press [ENTER] key, all intraday recorded files of all channels will 
be backup to the save device. A pop-up dialog will display the backup 
status.  
If backup device is not connected correctly or DVR do not detect the 
backup device, the following dialog will be pop-up. Please ask 
administrator for more information.  

Summary of Contents for QT-500-16

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands