Installation Manual
2. Preparation before Installation
16
www.qtech.ru
2.3
Precaution for Fiber Connection
Before connecting the fibers, you should ensure that the type of optical connector and the type
of fibers match the type of the optical interface used. Moreover, you should pay attention to the
Tx and Rx directions of the fiber. The Tx end of this device should be connected to the Rx end of
the peer device, and the Rx end of this device to the Tx end of the peer device.
2.4
Installation Tool
Common Tools
Cross screwdrivers, related electric and optical cables, bolts, diagonal
pliers, straps
Special-purpose Tools
Anti-static gloves, stripping pliers, crimping pliers, crystal head crimping
pliers, wire cutters
Fiber optic cleaning
Tools
Air-laid paper, fiber end microscope
Meter
Multimeter, errormeter, optic-power meter
QSW-6900-56LF
series is not shipped with a tool kit. You need to prepare a tool kit by
yourself.
2.5
Unpacking and Checking
Goods Checklist
Chassis
Carton
Chassis,
Yellow/green grounding cables; Quick installation guide; Packing list,
Pouched documents
Module
Carton
Various modules; Packing list; Quick installation guide
A normal delivery should contain the above mentioned items, which may differ from the
actual delivery, depending on purchase contracts. Please check your goods carefully
according to the packing list or purchase contract. If you have any questions or there are any
errors, please contact your distributor.
