Installation Manual
3. Product Installation
23
www.qtech.ru
If it is difficult or even impossible to insert the module, pull out the module, make sure the
extension module and guide rail are well aligned, and then insert the module again.
Power modules and fan modules with different air direction cannot be used together.
Remove the power module uprightly and slowly.
Install a filler panel in the location where the power module is removed to ensure the normal
ventilation and dissipation and avoid the dust in the chassis.
Installing Power Cord Retainer
Power cord retainer includes a strap and a ring. One side of the strap is smooth and the other
side is grooved. The ring has two buckles. Buckle A is used to remove the strap and buckle B is
used to adjust the ring.
Figure 3-7 Strap, Ring and Buckles
1.
Insert the strap into the hole at the bottom of the ring and lock it into place. If you want to
remove the strap, press buckle A and pull the strap out.
Figure 3-8 Installing Strap
