Installation Manual
3. Product Installation
21
www.qtech.ru
3.5
Installing and Removing a Fan Module
Wear anti-static gloves before the following operations.
Installing an Fan Module
Take out a new fan module from the fan module box.
Hold the handle at the end of the fan module. Insert the fan module to the chassis slowly along
the guide rail until it is fully seated, and make sure that it is in good contact with the slot.
Tighten the captive screws with a screwdriver to fix the fan module in the switch chassis.
Figure 3-4 Installing a Fan Module
Insert the fan module smoothly. Pay attention to the direction of the fan panel to avoid
wrong insertion.
If the position is not proper, withdraw the inserted module and re-insert it.
If the screws cannot be tightened, it is probably because the fan module is not fully inserted.
Please check it carefully.
Removing a Fan Module
1.
Loosen the captive screws of the fan module with a screwdriver.
2.
Hold the handle at the end of the fan module, and withdraw the fan module slowly.
3.
Install the fan filler panel and put the removed fan module into its package
