Руководство пользователя
1. Configuring WAN-4G
21
www.qtech.ru
Data center
Disaster
recovery center
In
tra
-c
ity
d
is
a
s
te
r r
e
c
o
v
e
ry
a
re
a
o
f b
ra
n
c
h
China
Unicom 3G
Operator B
4G router
Dual 4G backup, focusing on wired link
W
A
N
a
re
a
o
f b
ra
n
c
h
China
Telecom 3G
Wired link and dual 4G links networking topology
1.3.2.2
Configuration steps
Track detection is used in the configuration example. Alternatively, BFD can be used to associate with the wired link.
For detailed configuration, refer to the BFD configuration section in the Configuration Manual.
(1) Configure the wired link for track detection:
!Here, it is assumed that the IP address of the LNS corresponding to the wired link is 1.1.1.1.
Qtech(config)#ip rns 1
Qtech(config-ip-rns-icmp-echo)# icmp-echo 1.1.1.1 out-interface VLAN 1 next-hop 1.1.1.1
Qtech(config-ip-rns-icmp-echo)# timeout 3000
Qtech(config-ip-rns-icmp-echo)# frequency 3000
Qtech(config-ip-rns-icmp-echo)# ntime 3
Qtech(config)# track 1 rns 1
!Here, it is assumed that the IP address of the LNS corresponding to backup 4G link 1 is 2.2.2.2.
Qtech(config)#ip rns 2
Qtech(config-ip-rns-icmp-echo)# icmp-echo 2.2.2.2 out-interface Cellular 0/0
Qtech(config-ip-rns-icmp-echo)# timeout 3000
Qtech(config-ip-rns-icmp-echo)# frequency 3000
Qtech(config-ip-rns-icmp-echo)# ntime 3
Qtech(config)# track 2 rns 2
(2) Configure 4G dial-on-demand:
Qtech(config)#interface Cellular 0/0
Qtech(config-if-Cellular 0/0)# apply detect interface VLAN 1 track 1
Qtech(config-if-Cellular 0/0)# apply dial-on-demand
Qtech(config)#interface Cellular 1/0
Qtech(config-if-Cellular 1/0)# apply detect interface VLAN 1 track 1
Qtech(config-if-Cellular 1/0)# apply detect interface Cellular 0/0 track 2
Summary of Contents for QSR-2830
Page 1: ...www qtech ru QSR 2830...
