QTech QSR-2830, User Manual

Page: 2 / 28

www.qtech.ru
Оглавление
1 CONFIGURING WAN-4G 4
1.1 Overview 4
1.1.1
Brief Introduction 4
1.1.2 Basic Concepts 4
1.1.3 Working Principle 4
1.1.4 Applications 4
1.2 Configuring WAN-4G 4
1.2.1 Single Card and Single Access Dialing Function 4
1.2.1.1 Configuration steps 4
1.2.1.2
Configuring APN and PCO 5
1.2.1.3 Configuring a Single 4G Interface to Associate with Track 7
1.2.1.4 Configuring a Single 4G Interface to Associate with BFD 8
1.2.1.5
Configuring a Single 4G Interface and RSSI Status Detection 9
1.2.2
Single Card and Multiple Access Dialing Function 9
1.2.2.1 Configuring PCO and APN 10
1.2.2.2
Configuring a Single 4G Interface to Associate with Track 10
1.2.2.3
Configuring a Single 4G Interface to Associate with BFD 11
1.2.2.4
Configuring Switching of Different Access Points 12
1.2.3
Selecting 4G Network Access Mode 12
1.2.3.1 Configuration steps 12
1.2.3.2 Configuring to Directly Set Current Access Mode 12
1.2.4
Associating 4G Interface with Interface Protocol Status 13
1.2.4.1 Configuration steps 13
1.2.4.2
Configuring Association with Master Interface Protocol Status 13
1.2.5 Associating 4G Interface with Dial Stimulation (Interesting Traffic) Rule 13
1.2.5.1 Configuration steps 13
1.2.5.2
Configuring Association with Master Interface Protocol Status 13
1.2.6 Configuring 4G Backup 13
1.2.6.1 Configuration steps 13
1.2.6.2 Configuring 4G Backup Function 13
1.2.7
Configuring Interesting Traffic-Triggered Dialing 14
1.2.7.1 Configuration steps 14
1.2.7.2 Configuring Dial-on-demand 14
1.2.8
Anti-traffic-impact 15
1.2.8.1 Configuration Steps 15
1.2.8.2 Configuring Anti-traffic-impact Function 15