Руководство пользователя
1. Configuring WAN-4G
5
www.qtech.ru
3
Configuring a Single 4G Interface to
Associate with Track
Mandatory
1.2.1.2
Configuring APN and PCO
Configuration method 1:
Command
Description
Qtech# configure terminal
Enters the global configuration mode.
Qtech(config)# interface cellular
0/0
Enters the interface configuration mode.
Qtech(config-if-Cellular1)# profile create master apn
3gnet
Configures APN.
Qtech(config-if-Cellular 0/0 )# profile create master
username 3gnet password 0 3gnet
Configures the specified user name/password.
1: A public network SIM card can access the network normally without configuring the APN. The
APN can also be configured manually by referring to the public network access requirements of the
operator's network.
2: The APN needs to be correctly configured for a dedicated line SIM card. If there is an APN
configuration error, the SIM card may access a public network.
3: After the APN or PCO configuration is modified, validate the configuration by using any one of the
following three methods: Method 1: Execute
reset
on the interface to reset the interface. Method 2:
Execute
shutdown
on the interface, and then execute
no shutdown
after waiting for at least two
seconds. Method 3: Save the configuration and restart the host. If the configuration under the 4G
interface is modified by remotely logging in to the device through the 4G line, only method 1 or 2 can
be used. Any of the three methods can be used if the configuration is not modified through the 4G
line.
Example: Configure the APN and PCO functions on the interface cellular 0/0.
Qtech#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Qtech(config)#interface cellular 0/0
Qtech(config-if-Cllular 0/0)#profile create master apn 3gnet
Qtech(config-if-Cllular 0/0)#profile create master username user1 password pass1
Qtech(config-if-Cllular 0/0)#show run interface cellular 0/0
Building configuration...
Current configuration: 141 bytes
!
interface cellular 0/0
profile create master apn 3gnet
profile create master username user1 password pass1
Configuration method 2 (recommended):
Command
Description
Qtech# configure terminal
Enters the global configuration mode.
Qtech(config)# interface cellular
0/0
Enters the interface configuration mode.
Qtech(config-if-Cellular 0/0)# plmn sent-username
abc
password 0
123
[ apn
3gnet
]
Configures the user name, password and APN
(optional).
1: A public network SIM card can access the network normally without configuring the APN. The
APN can also be configured manually by referring to the public network access requirements of the
operator's network.
2: The APN needs to be correctly configured for a dedicated line SIM card. If there is an APN
configuration error, the SIM card may access a public network.
3: The dialing time is usually within 20s when the mobile network signal is normal. The dialing time is
relatively long when the signal is poor. Dialing attempts will continue until the dialing succeeds. The
modem will be reset during the period, and then dialing attempts are continuously made.
4: After the router is restarted or the modem is reset, the modem needs to be initialized. In this case,
the dialing time is about 90s.
Summary of Contents for QSR-2830
Page 1: ...www qtech ru QSR 2830...
