18 Operating Your Cleaner
Application Hints
First time cleaning
- first experiment with one piece, then proceed with
the remainder.
Solution level
- Be sure to maintain solution level within 3/8 inch of the
tank’s “operating level” line. Surface activity can vary with liquid level.
Load size
- It is faster and more efficient to run several small loads
rather than a few big loads.
Placing items
- Never allow items to sit on the bottom of the tank.
Always place them in a tray or beaker or suspend in the solution.
Rinsing items
- After cleaning, use a clean water bath to rinse away
chemicals adhering to items.
Lubricating items
- When necessary, re-lubricate items immediately
after cleaning.
Drying items
- Air drying at room temperature works for some items.
Place parts requiring faster drying time under hot air blowers or in ovens.
Please call Qsonica, LLC. Technical Support if you have application
questions.
CAUTION
Never clean
novelty or inexpensive jewelry
in the cleaner. The
combination of heat and vibration may loosen a cement-held setting.
Never clean
gemstones
such as emerald, amethyst, pearl, opal, coral,
turquoise, peridot or lapis lazuli in the cleaner.
