13
EN
6. Tilt the top of the Page Station back and install the Page Station onto the Mounting Plate by aligning the two tabs on the Page Station with the two
slots on the Mounting Plate. Refer to
Figure 16
.
7. With the Page Station still tilted, carefully bundle the wiring back into the wall (or triple-gang electrical box).
8. Push the bottom of the Page Station to the wall.
9. Install and tighten the screw
(Figure 16a)
removed in step 1, through the Mounting Bracket up into the Page Station.
— Figure 16 —
a
Mounting tabs on
back of Page Station
