11
EN
Wbout PoE and WAX PI EA
There is no On/Off switch for the Page Station, making the order in which the power is connected important. The following information describes the
events when power is lost based on which power is supplied to the Page Station first.
• If AUX POWER is supplied first:
• The Page Station boots using AUX POWER.
• If PoE is then connected, it is not used.
• If AUX POWER fails, power to the Page Station is lost, the Page Station re-boots using PoE.
• If PoE fails with AUX POWER still available, there is no effect - PoE was not being used.
• If PoE is supplied first:
• The Page Station boots using PoE.
• If AUX POWER is then connected, it is not used.
• If PoE fails, the Page Station switches to AUX POWER. There is no re-boot.
• If AUX POWER fails with PoE still available, there is no effect AUX POWER was not being used.
• If PoE returns, the Page Station remains on AUX POWER.
Asing the Page Station Menu
To access the menu, when the "Q-Sys not configured" message is displayed, press and hold the Talk/Start button until the first item in the menu is
displayed. Press the Talk/Start button to sequence through the menu pages. The following list shows the six pages with factory default settings. The
factory settings are slightly different for each Page Station, below is an example.
• Q-Sys Page Station
• Model PS-1600H
• Name:
• Page Station 40ab
• LAN A
• IP Addr 169.254.36.146
• Netmask 255.255.0.0
• LAN B
• IP Addr 169.254.55.4
• Netmask 255.255.0.0
• Firmware Version
• 2.0.111
• Copyright (C) 2010
• QSC Audio Products, LLC.
Aeset the Page Station to Factory Defaults
1. If the Page Station is part of a running design, do the following:
a. In Q-Sys Designer, from the main menu, select
File
>
Load from Core and Connect
. Select the design containing the Page
Station you wish to reset.
b. From the main menu, select
Tools
>
Configurator...
c. Select the Page Station you wish to reset.
d. Change the hostname of the Page Station. "Q-Sys not configured" displays on the Page Station LCD.
2. Follow the procedure "Using the Page Station Menu" on page 11 to access the menu.
3. Press the Talk/Start button to access the Name, LAN-A, or LAN-B menu page.
