background image

2

EN

IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS

WARNING! 

 WARNRNG!:

 

The term “ WARNRNG” indicates instructions regarding personal safety. Nf the instructions are not followed the result may 

be bodily injury or death.

 WATNIRG!:

 

The term “ WATNIRG” indicates instructions regarding possible damage to physical equipment. Nf these instructions are 

not followed, it may result in damage to the equipment that may not be covered under the warranty.

NMPIATWRTG!:  The term “NMPIATWRTG” indicates instructions or information that are vital to the successful completion of the procedure. 

RITE!: The term RITE is used to indicate additional useful information.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating 
and maintenance instructions in this manual. 

The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" 
voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.

Safeguards

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. 
Nmproper use can result in potential electrical shock or fire hazards. Nn order not to defeat the safeguards, observe the following instructions 
for its installation, use and servicing. 

WARNING

1.  To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.
2.  Disconnect all power before servicing. 
3.  To prevent fire or electric shock, do not expose this equipment to rain or moisture.
4.  Maximum operating ambient temperature is 50°C (122°F). 
5.  Power must be supplied to the unit from an IEEE 802.3af compliant power sourcing equipment (PSE) using data communications cabling having a 

rating of category 5e or greater (CAT-5e) or from the op24 VDC/500 mA power supply. 

6.  Do not use any liquid cleaners on the Page Station. Use only static-free electronic cleaning cloths.

Summary of Contents for Q-SYS PS-1600

















Reviews: