HEADSET MICROPHONE
USER MANUAL
www.omnitronic.com
00049588.DOC, Version 1.1
Headset microphone for
TM-105
HS-105
TM-105
W.A.M.S.-05
TM-105
The headset microphone
was designed for vocal sound and speech applications which
require hands-free operation and is ideally suited for use with the multifrequency transmitter
, which is a component of the PA system
.
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Put on the headset microphone and place the microphone cartridge close to the mouth into a
convenient talk position.
Connect the 3.5 mm jack of the microphone cable to the input jack of the pocket transmitter
.
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Condenser
Directivity pattern: .............Omnidirectional
Frequency response: ........20 - 20,000 Hz
Sensitivity: ........................-45 dB (± 3 dB)
Impedance: ......................1000
(± 30 %)
Power supply: ...................1.5 - 16 V
.........................................via pocket transmitter
Connection: ......................3.5 mm stereo jack plug
Cable length: ....................1.2 m
Weight: .............................20 g
Safety Instructions
Setting into Operation
Cleaning
Technical Specifications
Always use the supplied windscreen to protect the microphone capsule from dust and moisture, and
reduce pop and wind noise to a minimum.
Type:.................................
W
!
!
Please note: Every information is subject to change without prior notice. 10.10.2009 ©
HS-105