QSC PLD4/2, User Manual, Page: 23 / 145

23
EN EN
TD-000368-00-A
Array Correction
NOTE!:
You must have a QSC line array loaded in order to access the Array Correction parameters.
HOME > OUTPUTS > SPKR PROC > ARRAY > ENTER
Step 1 — Set Splay Angle and Number of Boxes in the Array
F1: A B C D
Output
A
Boxes #
4
AC
Angle
15.0
Angle:
0.0˚ to 90.0˚
Boxes #:
0 to 20
Splay Angle: Total cumlative
angle of the array.
Array Length: Total number of
boxes in the array.
Scroll to select (Angle or Boxes#)
Turn to adjust parameter
ENTER
To edit, press
To confirm, press
ENTER
EXIT
To exit, press
Save a Loudspeaker
HOME > OUTPUTS > SPKR PROC > SAVE SPKR > ENTER
When you Save a speaker profile, you are saving all of the output settings currently active for the channel. The new profile you save does not need to
be Loaded, it is already active.
Step 1 —
Save a Loudspeaker with Custom Load Profile
ABOUT SPEAKERS SAVE
Output Data: AB + CD
16.0 Nominal Imped:
1000
Band: 2-Way LF
Power Rating:
Enter Speaker Info
After confirming settings, Scroll to SAVE
Nominal Impedance and
Power Rating are the nominal
settings for a single loudspeaker
of this type.
Scroll to select (Band,
Nominal Imped, Power Rating)
Turn to adjust parameter
ENTER
To edit, press
To confirm, press
ENTER
Step 2 —
Name the Loudspeaker Profile
Press ENTER to edit name
SAVE
Speaker Profile Name
M y S p k r
SAVE SPEAKERS ABOUT T
o add Speaker Profile Name, press
ENTER
Scroll to desired letter position press
ENTER
Turn to select desired character press
ENTER
When finished, scroll to SAVE press
ENTER
Up to 21 characters
A - Z / a - z / 0 - 9 /
_ / - / space
Indicates “Speaker
Profile Name”
is selected
Indicates editing