Qsan XCubeSAN XS5224D, User Manual

Page: 37 / 339

Prepare for Installation
15
characters. Valid characters are [ A~Z | a~z | 0~9 |
~!@#%^&*_-+=|(){}[]:;<>.?/ ].
Target CHAP Password: (optional)
CHAP (Challenge-Handshake Authentication Protocol)
password. The length of the password is between 12 to 16
characters. Valid characters are [ A~Z | a~z | 0~9 |
~!@#$%^&*_-+=`|\(){}[]:;”’<>,.?/ ].
Target Volume Name:
Select one of created volume for target.
Target Volume Capacity:
Check the capacity of target volume.
Schedule Remote Replications: (optional)
Define the cycle of remote replications.
Traffic Shaping for Peak Hour: (optional)
Limit the transfer rate at peak hour.
Traffic Shaping for Off-peak Hour: (optional)
Limit the transfer rate at off-peak hour.
Off-peak Hour: (optional)
Define the off-peak hours.
Now please follow the steps and fill the worksheet out for initial system configuration.
2.1.1. Configuration Planning for Initial Setup
In Table 2-1, the items on part 1, initial configuration, are listed for the initial setup. The
information in the following checklist is helpful before the initial configuration is performed.

System name allows maximum 32 characters. Valid characters are [ A~Z | a~z | 0~9 | -
_<> ].
 Administrator password allows maximum 12 characters. Valid characters are [ A~Z |
a~z | 0~9 | ~!@#$%^&*_-+=`|\(){}[]:;”’<>,.?/ ].
 The date and time can be manually entered, but to keep the clock synchronized,
recommend using a NTP (Network Time Protocol) service.

Enter the time zone based on your geographical location.