98 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
TIP:
A CHAP account must be added before you can use this authentication
method. Please refer to the chapter 7.3.4,
After enabling the CHAP authentication mode, the host initiator should be
set with the same CHAP account. Otherwise, the host cannot connect to
the volume.
Change CHAP Users
Click
▼
-> Change CHAP Users
, and then select the CHAP users that you would like to have
access to this target. CHAP users can be more than one, but it must be at least one CHAP to
enable on the target.
Figure 7-13
Change CHAP Users
Change Target Name
Click
▼
-> Change Target Name
to change iSCSI target name if necessary. The maximum
length of the target name is 223 characters. Valid characters are [ a~z | 0~9 | -.: ].
Summary of Contents for XCubeSAN XS5224D
