94 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
INFORMATION:
VLAN ID:
VLAN ID is a number ranges from 2 to 4094. Three numbers (0,
1, and 4095) are reserved for special purposes.
Priority:
The PCP (Priority Code Point) is a number ranges from 0 to 7 and
reserved for QoS (Quality of Service). The definition is compliant with IEEE
802.1p protocol and 0 is the default value. In normal cases, you don't need
to set this value.
Set Default Gateway
Click
▼
-> Set Default Gateway
to set the gateway of the IP address as default gateway.
There can be only one default gateway.
Remove Default Gateway
To remove the default gateway, click
▼
-> Remove Default Gateway
.
Set Jumbo Frames
Click
▼
-> Set Jumbo Frames
to set the MTU (Maximum Transmission Unit) size. The
jumbo frame size could be set as 4000 or 9000 bytes. Jumbo Frame is disabled by default.
Figure 7-8
Set Jumbo Frame
CAUTION:
If the VLAN ID or jumbo frames are set, the related switching hub and
HBA on host must be set, too. Otherwise, the LAN connection cannot
work properly.
Summary of Contents for XCubeSAN XS5224D
