QRS BIOLOG 3000i User Manual Download Page 37

Page: 37 / 47

33 PRINTING & TRANSMITTING THE ECG

You will need a Biolog to Modem Adapter Cable and a standard

serial adapter or cable from the modem to a DB9 female

socket.
To transfer a stored ECG to CardioView by modem, enable the

modem field in Set up screen 3 (refer to section 2.6). Enter the full

telephone number of the receiving station, and set the baud rate as

recommended by your modem manufacturer (refer to section 2.6). The

telephone dial string may contain the following:
0…9

Normal telephone number digits

A…D

Normal telephone digits

Hash key

Star key

Dial pause (for switchboards)

Tone dialling (default)

Pulse (decadic) dialling

Wait for dial tone

Wait for silence

Flash/On hook

– and <space>

Ignored: may be used to format the dial string

Power the BIOLOG 3000

on, and then connect the BIOLOG 3000

the modem or digital mobile phone using the cable. Press and hold

the REV button to start the transfer.

NOTE:

The receiving station must be ready to receive the data (refer to the CardioView

user manual for more information).

The BIOLOG 3000

should make the call and send the data

automatically.
If there is a failure in the connection to the modem, it is not switched on,

or the baud rate is incorrect, a higher then a lower long tone will sound

and normal review mode will be entered.
If the modem is connected and operating correctly, a screen headed

“

Transfer Mode

” will appear. Below this, the modem’s

responses to the setup string and dial command will be displayed. If the

response “

ERROR

” is seen then the modem has a problem with the

initialization string or the dial string. You will need to set the “init” string

to values recommended by your modem instructions, and ensure that

the dial string does not contain any incorrect characters. Note that

configuration of the “setup string” requires the Biolog 3000

Setup utility,

supplied with CardioView.

Summary of Contents for BIOLOG 3000i
















































Search results

Summary of Contents for BIOLOG 3000i

Reviews:

Related manuals for BIOLOG 3000i

Brands by name

Popular brands

QRS BIOLOG 3000i, User Manual

Search results

Summary of Contents for BIOLOG 3000i

Reviews:

Related manuals for BIOLOG 3000i

Brands by name

Popular brands