SETTING UP THE BIOLOG 3000
i
20
2.5.5 Selecting the Mains (50/60 Hz) Filter
You can select between 50 Hz and 60 Hz filters, in accordance with the
mains current, in the country of use. The default factory setting is 50 Hz.
•
To select a 60 Hz mains filter value, move the cursor to the
symbol 50 position, by pressing the HOLD key repeatedly.
•
To change the mains filter to 60 Hz, simply press the REV key
(Figure 2.11).
Figure 2.11: Selecting Mains Filter
2.5.6 Print Speed
The Biolog Printer Interface can be set to either 25mm/sec or 50mm/sec.
•
To select print speed press the Hold key (right arrow).
•
To set print speed press the REV key to the desired value
25mm/sec or 50mm/sec.
