QRS Music Technologies PMII, Installation Manual, Page: 36 / 52

Adjustment Procedures
36
July 2013
Key Adjust
The key adjustment sets the minimum force for each key.
There is no “save” bu on. Your changes are automa cally saved to memory.
Press “System Setup”
Stop the Test File. Press “Key Adjust” and then the “START” bu on.
Piano key #5 should begin to repeat. [ Key #1 for 88 note systems ]
You must set the Legato AND Staccato Force levels for each key.
Set the Legato adjustment fi rst.
Previous Key / Key Number / Next Key
Key “Force”: Legato & Staccato. Adjust so key plays as so ly as possible.
“Extend”: Sets the Force value “displayed” to all notes upscale.
Clicking “More” or “Less” increases or decreases the force for ALL Keys.
Entering a number in the force box sets the Key Force value entered to ALL Keys.
Chroma c Scale: Down/Up. Use as a fi nal test.
Please press the EXIT bu on when fi nished. Otherwise the note will con nue to play.
Global
Press “Test Files” then “Test ‐ Up_Down Runs” for a warm ‐ up before adjus ng key levels.
Stop