QCX assembly Rev 1.08
80
3.3 VFO B
14,032,500
This parameter specifies the VFO B frequency at power-up. The current VFO B frequency during
ordinary operation is not stored in this parameter unless you “Save settings” as described
previously.
3.4 Tune rate
100 Hz
This LIST parameter specifies the Tune rate power-up. Available values are: 10MHz, 1MHz,
100kHz, 10kHz, 1kHz, 500Hz, 100Hz, 10Hz or 1Hz. The current Tune rate during ordinary
operation is not stored in t
his parameter unless you “Save settings” as described previously.
3.5 RIT
+0,000
This parameter specifies the RIT at power-up. The current RIT amount during ordinary operation is
not stored in this parameter unless you “Save settings” as described previously.
3.6 RIT rate
10 Hz
This parameter specifies the RIT tuning rate at power-up. The current RIT tuning rate during
ordinary operation is not stored in this parameter unless you “Save settings” as described
previously.
3.7 CW mode
CW
This LIST parameter specifies the CW mode. Ordinarily CW is received in Upper sideband with a
700Hz offset. They may be some occasions where operation on the other sideband is desired
(lower sideband), for example to exclude an interfering nearby station when the CW filter
performance is asymmetric. In these cases you can change the parameter value to CW-R (reverse
mode CW) to select Lower sideband reception mode.
Summary of Contents for QCX 5W CW
