QCX assembly Rev 1.08
59
3.62
Install four 12mm hex spacers at the LCD corners
Install the four 12mm spacers on the top side of the PCB, threading four M3 nylon screws through
from the underside of the PCB. These four spacers fix the LCD module to the PCB assembly.
3.63
Install four 12mm hex spacers at the PCB corners
These spacers are installed on the bottom side of the PCB, with the four M3 screws threaded
throu
gh from the top (component) side. These four spacers make four little “pillars” at the board
corners, to keep the underside suspended above your workbench or fixing to an enclosure.
Summary of Contents for QCX 5W CW
