IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is good to connect the
Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8. Click
OK
and reboot your PC after completes the IP parameters setting.
For OS of Microsoft Windows NT:
1. Click the
Start
button and select Settings, then click
Control Panel
. The
Control Panel
window will appear.
2. Move mouse and double-click the right button on Network icon. The Network window will appear. Click Protocol tab
from the Network window.
3. Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add button to install it;
otherwise go to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add button.
5. Select
TCP/IP
in
Microsoft of Select Network Protocol
dialog box then click OK button to install the TCP/IP
protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to
Network
dialog
box after the TCP/IP installation.
6. Select
TCP/IP
and click the properties button on the
Network
dialog box.
7. Select Specify an IP address and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is good to connect the
Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8. Click
OK
to complete the IP parameters setting.
Connect to the WLAN Broadband Router
Open a WEB browser, i.e. Microsoft Internet Explore 6.1 SP1 or above, then enter 192.168.1.254 on the URL to
connect the WLAN Broadband Router.
Management and configuration on the WLAN Broadband Router
