Software configuration
There are web based management and configuration functions allowing you to have the jobs done easily.
The WLAN Broadband Router is delivered with the following factory default parameters on the Ethernet LAN
interfaces.
Default IP Address:
192.168.1.254
Default IP subnet mask:
255.255.255.0
WEB login User Name:
<empty>
WEB login Password:
<empty>
Prepare your PC to configure the WLAN Broadband Router
For OS of Microsoft Windows 2000/ XP:
1. Click the
Start
button and select Settings, then click
Control Panel
. The
Control Panel
window will appear.
2. Move mouse and double-click the right button on
Network and Dial-up Connections
icon. Move mouse and
double-click the
Local Area Connection
icon. The
Local Area Connection
window will appear. Click
Properties
button in the
Local Area Connection
window.
3. Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it;
otherwise go to step 6.
4. Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5. Select
TCP/IP
in
Microsoft of Select Network Protocol
dialog box then click OK button to install the TCP/IP
protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to
Network
dialog
box after the TCP/IP installation.
6. Select
TCP/IP
and click the properties button on the
Network
dialog box.
7. Select Specify an IP address and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is good to connect the
Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
8. Click
OK
to completes the IP parameters setting.
For OS of Microsoft Windows Vista:
1. Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2. Move mouse and double-click the right button on
Network Connections
item. The
Network Connections
window
will appear. Double click
Local Area Connection
icon, then User Account Control window shown. Right click
Continue button to set properties.
3. In
Local Area Connection Properties
window, Choose
Networking
tab, move mouse and click
Internet Protocol
Version 4 (TCP/IPv4)
, then click
Properties
button.
4. Move mouse and click
General
tab, Select
Specify an IP address
and type in values as following example.
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is good to connect the
Wireless LAN Access Point.
IP Subnet Mask:
255.255.255.0
5. Click
OK
to complete the IP parameters setting.
For OS of Microsoft Windows 95/ 98/ Me:
1. Click the
Start
button and select Settings, then click
Control Panel
. The
Control Panel
window will appear.
Note:
Windows Me users may not see the Network control panel. If so, select
View all Control Panel options
on the left side of the window
2. Move mouse and double-click the right button on
Network
icon. The
Network
window will appear.
3. Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it;
otherwise go to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add button.
5. Select
TCP/IP
in
Microsoft of Select Network Protocol
dialog box then click OK button to install the TCP/IP
protocol, it may need the Microsoft Windows CD to complete the installation. Close and go back to
Network
dialog
box after the TCP/IP installation.
6. Select
TCP/IP
and click the properties button on the
Network
dialog box.
7. Select Specify an IP address and type in values as following example.
