WPS
This page allows you to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could let your wireless
client automically syncronize its setting and connect to the Access Point in a minute without any hassle.
Item
Description
Disable WPS
Click on to disable the Wi-Fi Protected Setup function.
WPS Status
Show WPS status is
Configured
or
UnConfigured
.
Self-PIN Number
Fill in the PIN Number of AP to register the wireless distribution system
access capability.
Push Button
Configuration
The
Start PBC
button provides tool to scan the wireless network. If any
Access Point or IBSS is found, you could connect it automatically when
client join PBC mode.
Apply Changes
Click the
Apply Changes
button to complete the new configuration
setting.
Reset
Click the
Reset
button to abort change and recover the previous
configuration setting.
Current Key Info
Authentication
：
It shows the Authentication is opened or closed.
Encryption
：
It shows the Encryption mode.
Key
：
It shows the Encryption key.
Client PIN Number
Fill in the
Client PIN Number
from your Client sites.
