9
CONF IG URA TION
L o g i n
1.
Start your computer. Connect an Ethernet cable between your computer and the
Wireless Access Point.
2.
Make sure your wired station is set to the same subnet as the Wireless Access Point,
i.e. 192.168.1.254
3.
Start your WEB browser. In the
Address
box, enter the following:
The configuration menu is divided into four categories:
Status, Wireless, TCP/IP,
and
Other
settings
. Click on the desired setup item to expand the page in the main
navigation page. The setup pages covered in this utility are described below.
No username and password required for the fist login, however, you can set up a set
of password for the future security and username is can’t change, for detailed
configuration, please refer to the
Password
in the later section of Configuration.
4. Default username: please key in “admin” on login web page.
