13
modes
AP
,
Client, Bridge and Repeater.
Network Type
When in
Client
mode, you can select
between
Ad-Hoc
and
Infrastructure
.
SSID
The SSID differentiates one WLAN from
another, therefore, all access points and all
devices attempting to connect to a specific
WLAN must use the same SSID. It is case-
sensitive and must not exceed 32 characters.
A device will not be permitted to join the
BSS unless it can provide the unique SSID.
An SSID is also referred to as a network
name because essentially it is a name that
identifies a wireless network.
Channel Number
Allow user to set the channel
manually
or
automatically
.
If set channel manually, just select the
channel you want to specify.
If “Auto” is selected, user can set the
channel range to have Wireless Access Point
automatically survey and choose the channel
with best situation for communication.
The number of channels supported depends
on the region of this Access Point. All
stations communicating with the Access
Point must use the same channel.
Enable Mac Clone (Single Ethernet
Client)
If your ISP restricts service to PCs only, use
the MAC Clone feature to copy a PC Media
Access Control (MAC) address to your
router. This procedure will cause the router
to appear
as a single PC, while allowing online access
to multiple computers on your network.
Apply Changes
Press to save the new settings on the screen.
Reset
Press to discard the data you have entered
since last time you press Apply Change.
Advanced Settings
It is not recommended that settings in this page to be changed unless advanced users want
to change to meet their wireless environment for optimal performance
