11
SSID. An SSID is also referred to as a network name because
essentially it is a name that identifies a wireless network.
Channel Number
The number of channels supported depends on the region of
this Access Point. All stations communicating with the Access
Point must use the same channel.
Encryption
WEP Encryption
(Wired Equivalent Privacy) is set to
Disabled
by default. When WEP is enabled, data packet is
encrypted
before being transmitted. The WEP prevents data packets from
being eavesdropped by unrelated people. By using WEP data
encryption, there may be a significant degradation of the data
throughput on the wireless link.
Associated Clients
Displays the total number of clients associated to this AP. You
can have up to 64 clients to associate to this Access Point.
BSSID
BSSID
displays the ID of current BSS, which uniquely
identifies each BSS. In AP mode, this value is the MAC
address of this Access Point.
TCP/IP Configuration
IP Protocol
Display the method to get the IP of this AP, which could be
obtained by Fixed-IP or DHCP-client.
br0 IP Address
Current IP address for this Access Point
br0 Subnet Mask
Current Subnet mask for this Access Point
br0 Default Gateway
Default Gateway for this Access Point
br0 MAC Address
The MAC Address for this Access Point
Statistics
The Statistics table shows the packets sent/received over wireless and ethernet LAN
respectively.
