CAI-QMINP-01 - QMini Plug Connector Customer Assembly Instructions
Document:
CAI-QMINP-01
Revision:
14
Release Date:
12/08/2014
Revision Date:
10/14/2019
QPC Fiber Optic, LLC
www.qpcfiber.com
27612 El Lazo Road, Laguna Niguel, CA 92677
Ph: (949) 361-8855
Page 4 of 9
CABLE PREPARATION
For cables that have an outer
diameter of
3.6mm – 7.5mm
,
slide parts over cable in the
following order:
1. Label (if applicable)
2. Bend Limiter
3. Backshell
4. Cable Seal
5. Washer
6. Coupling Ring
7. Strain Relief
8. Wave Spring
.
For cables that have an outer
diameter of
7.6mm – 10.5mm
,
slide parts over cable in the
following order:
1. Label (if applicable)
2. Heat Shrink Bend
Limiter
3. Heat Shrink Backshell
Plug
4. O-Ring
5. Coupling Ring
6. Strain Relief
7. Wave Spring
8. Washer
WAVE SPRING