the Baud Rate and Parity based on the projector’s Baud rate, then
click “Open”.
Click the projector control buttons on the visualizer’s operating panel
to check if the control code that the program received is the same as
the sending code. If the receiving code is same to the sending code,
the input codes are correct. If the visualizer can not control the
projector, please do the following.
1. Check to see if the source control codes of projector are correct.
2. Check to make sure the connection between the visualizer and the
projector is correct.
FOLDING THE UNIT
1.
Fold
the right arm light down first onto the base, then the left arm
down.
Rotate
the camera head clockwise until the camera head is
parallel to the camera stand.
24
