PROJECTOR INPUTS SELECTION
When the projector is connected to several input sources, use the
“Pin” button to switch signal inputs of the projector. (On the remote
control, press the “PROJECTOR INPUT” button)
Note: Please connect the projector RS232 cable between the
projector and the visualizer first. If you cannot switch projector inputs
by pressing this button, you need to manually program the RS232
code into the visualizer. See the section “Controlling Projector with
Visualizer” for detailed instruction.
IMAGE REVERSION
Press the “Mir” button once to V-reverse the image and the vertically
mirrored image will be displayed. Press the “Mir” button again to exit.
(On the remote control, please press the “MIRROR” button)
IMAGE SPLIT
Press “SPLIT”, the image will be split into two images. One is the
current captured image the other is a frozen image of the last image,
Press the “SPLIT” button again to exit.
Note: This function is not available on S-Video and Video
output.
DYNAMIC/STATIC MODE SWITCH
To display dynamic images, Press the “D./S.” button to switch to
the Dynamic mode, the image will be clear and has no choppy strobe
effect. To display still images, press the “D. / S.” button switch to the
17
