USB CAPTURE FOR MAC COMPUTER
Copy the folder “Mac Driver” into Mac hard disk, open the folder and
double click “Empia 1.0.0b2.zip”, the “setup” file appears. Following
the screen notice, click “Next” and finish installation.
Notes:
1. Please connect the Mac computer and visualizer when installing
driver.
2. Please use the USB2.0 cable provided with visualizer.
WORKING ON THE STAGE
1. Place your material on the working surface.
2. Select the enlargement required with the “
+
T
” and “
W
” keys.
3. Adjust the focus with the “Near” and “Far” keys or “AUTO” key.
WORKING OUTSIDE THE STAGE
For showing 3-dimensional objects with the visualizer, just place
them on the working surface and adjust the “
+
T
” or “
W
” and
“AUTO” keys. If the object is too big for the stage or you want to show
it from the side, just place it behind or in front of the unit and tilt the
camera by hand (please take off the close-up lens first).
Rotate 330 degrees
vertically
13
