Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
www.qomo.com
15
Exit
– exit the current quiz session
F1
–Controls the Register/Answering Status Bar size, by continuing to press the
button you will cycle the size from large to small and then it will disappear.
F2
–Controls the
Register/Answering Status Bar
position, by continuing to press the
button you will cycle the position from top, left and right.
Report/ Result
/
Displays the instant report and result.(If desired) Refer
to session 2.1.1.7
Result and Report
.
Note:
All of these control buttons are duplicated and displayed on the instructor’s remote keypad.
2. The Question Answer Timer:
The timeout value is selected for each question during the quiz file set up.
The timer box background colors and functions are:
Black
:
Stop
;
Green
:
Running
;
Yellow
:
Pause
.
The left up/down
button will reset the
Minutes
Press the
up or down
button on the
left side of the timer box to increase or decrease the
Minute’s
.
The right
up/down
button will reset the
Seconds
Press the
up or down
button on
the right side of the timer box to increase or decrease the
Second’s.
3. Quiz Status:
Activity Mode: Indicates the current activity you have selected.
Hand Raise: Indicates the number of students who use the raise hand function in their
keypad.
Answered/Total: Indicates the ratio of the number of people who answer the question to the
total number of people who have logged in.
Question Done: When the question is finished, the sign “Done” will display.
Question No: Indicates the current question number.
Page/Total: The current page number of the total pages.
To begin gathering responses from the students, click the
Start
/
Pause
button or using the
instructor remote keypad press the
play
\button. The register number corresponding to each
individual clicker logged in will appear on the top of the screen.
The countdown timer will display the remaining time in minute(s) and seconds. The timer value may
be increased or decreased by pressing the
up/down
button before or during the question test. Once
the timer is at 0, the receiver will no longer receive audience/participant responses. The timer
window will change to black. The instructor can always stop the timer by pressing the
Start/Pause
