manualshive.com logo in svg

QOLSYS IQ4 Hub, Installation Manual

Share
Download
QOLSYS IQ4 Hub Installation Manual Download Page 105

Z-WAVE DEVICES

QOLSYS CONFIDENTIAL AND PROPRIETARY 

PAGE 

 OF 

105

197

PROVISIONING LIST

NETWORK STATUS: 
Not in network

: When a device has been paired but has 

not yet been plugged in it will show Not in Network. 
These devices can also be deleted using the trash can. 

Started: 

Once the device has been paired and then 

plugged in, it will start the inclusion process with the 
panel and run in the back ground. 

Included: 

When a device has completed the inclusion 

process it will then show as “included” in the 
provisioning list and at that point the panel’s UI will 
reflect the included devices. 

Provisioning List 

Devices added via SmartStart will show up in the provision list. This list will show the network status of those 
devices. Once a devices reaches the “Included” state on the panel, it can no longer be deleted using the trash 
can method and must follow standard clearing process. 

Summary of Contents for IQ4 Hub






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands