background image

 

187 

 

6.6.2

 

Recording Settings 

 
Select a camera on the list and configure the recording resolution, frame rate, and quality.   
Enable audio recording, manual recording, recording data retention, real-time digital 
watermarking, and auto snapshot settings.    Click ‘Apply’ to save the settings. 
 

 

 
1.

 

Video compression: Choose a video compression format for the recording. 

2.

 

Resolution: Select the recording resolution. 

3.

 

Frame rate: Adjust the frame rate for the recording.    Note that the frame rate of the 
IP camera may be affected by the network traffic. 

4.

 

Quality: Select the image quality for the recording.    More disk space is required to 
save higher quality recording. 

5.

 

Audio recording (optional): To enable the audio recording, click ‘Enable audio 
recording on this camera’. 

6.

 

Estimated storage space for recording: The number of the estimated storage space for 
recording is only for reference.    The actual space required depends on the network 
environment and the camera performance. 

7.

 

Manual recording: To allow manual activation and deactivation of manual recording 
function on the monitoring page, enable this option. 

Summary of Contents for VIOSTOR NVR









































































































































































































































































Reviews: