QNAP VioStor CMS User Manual Download Page 172

Page: 172 / 204

172

Disk Configuration

Single Disk Volume

Each hard drive is used as a standalone disk. If

a hard drive is damaged, all the data will be

lost.

RAID 0 Striping Disk Volume

RAID 0 (striping disk) combines 2 or more hard

drives into one larger volume. The data is

written to the hard drive without any parity

information and no redundancy is offered.

The total storage capacity of a RAID 0 disk

volume is equal to the sum of the capacity of all

member hard drives.

RAID 1 Mirroring Disk Volume

RAID 1 duplicates the data between two hard

drives to provide disk mirroring. To create a

RAID 1 array, a minimum of 2 hard drives are

required.

The storage capacity of a RAID 1 disk volume is

equal to the size of the smallest hard drive.

Summary of Contents for VioStor CMS












































































































































































































Search results

Summary of Contents for VioStor CMS

Reviews:

Related manuals for VioStor CMS

Brands by name

Popular brands

QNAP VioStor CMS, User Manual

Search results

Summary of Contents for VioStor CMS

Reviews:

Related manuals for VioStor CMS

Brands by name

Popular brands