QNAP VioStor CMS User Manual Download Page 11

Page: 11 / 204

Chapter 1

Introduction

1.1

Overview

The QNAP Central Management System (CMS) is a high performance turnkey solution for

large-scale and multiple-site surveillance projects. The CMS Client is a software utility

designed to manage the QNAP VioStor network video recorders (NVR) and perform live

video monitoring, recording, and playback. The CMS Server supports up to a maximum of

128 multi-server monitoring. Users can monitor up to a maximum of 1024 IP cameras, up

to a maximum of 64 channels per screen. Concurrent independent playbacks and display

controls in four screens are also supported. The CMS Server has the highest compatibility

with the QNAP VioStor NVR series and also supports a variety of brand name IP cameras.

For detailed compatibility list, please refer to:

http://www.qnapsecurity.com/pro_compatibility_camera.asp

Summary of Contents for VioStor CMS












































































































































































































Search results

Summary of Contents for VioStor CMS

Reviews:

Related manuals for VioStor CMS

Brands by name

Popular brands

QNAP VioStor CMS, User Manual

Search results

Summary of Contents for VioStor CMS

Reviews:

Related manuals for VioStor CMS

Brands by name

Popular brands