QNAP VioStor CMS User Manual Download Page 129

Page: 129 / 204

129

When an alarm is triggered, move the mouse cursor to the icon and the alarm information

will be displayed. Double click the camera symbol to open the Instant Camera Viewing

Popup Window and click the stop symbol to clear the alarm record. Double click the camera

icon and a live window for the camera will pop up. If you further click the maximize button

on the top right of the window, the video will occupy the single channel view for you to

immediately monitor the camera where the alarm occurred. Click the close or restore down

button to return to the E-map.

When moving the mouse cursor to the alarm snapshot in the alarm list to the right, the

camera information and alarm content will both be shown.

Note:

Only the first 150 records can be saved in the event logs.

Summary of Contents for VioStor CMS












































































































































































































Search results

Summary of Contents for VioStor CMS

Reviews:

QNAP VioStor CMS, User Manual, Page: 129 / 204

Search results

Summary of Contents for VioStor CMS

Reviews: