USB One Touch Copy button
The USB One Touch Copy button allows you to copy data backups from a USB device to the QNAP device or
from the QNAP device to a USB device.
This feature supports incremental backups. The QNAP device only copies files that were modified or added
after the last backup.
To configure the behavior of the button when an external device is connected to the button's USB port,
install and use Hybrid Backup Sync on your QNAP operating system. For details, see the
documentation.
LCD panel
The LCD panel allows you to perform the following operations:
• Restart and power off the device
• Configure or change the LCD panel password
• View and configure network settings
• View information on the system, physical disks, and shared folders
Viewing TCP/IP settings
You can view the following settings for each network adapter on the NAS.
• IP address
• Subnet mask
• Default gateway
• Primary DNS
• Secondary DNS
1. Press Enter or Select.
The panel displays the NAS name and QuTS hero version.
2. Press and hold Enter for two seconds.
The panel displays
Main Menu 1. TCP/IP
.
3. Press and hold Enter.
The panel displays the IP address of the first network adapter.
4. Press and hold Select to view the next TCP/IP screen.
Repeat this step as necessary.
Configuring TCP/IP settings
You can configure the following settings for each network adapter on the device:
• IP address
• Subnet mask
TVS-hx74T User Guide
Basic Operations
41
