QNAP TVS-h 74t Series User Manual Download Page 34

Page: 34 / 71

Expansion Unit

Model

Description

Required Accessories

TL-R1200S-RP

• Uses a SATA 6 Gbps (SFF-8088)

interface

• Supports SATA HDD/SSD

• 3 x SFF-8088 to SFF-8644 connector

cables

• QXP-1600eS-A1164 host bus adapter

• RAIL-B02

Connecting SATA JBOD expansion units

To connect the TVS-hx74T to SATA JBOD expansion units, a host bus adapter must be installed on the NAS.

For required accessories details, see

Expansion unit installation

1. Power off the NAS.

2. Install a host bus adapter on the PCIe slot.

For details, see

Installing expansion cards

Important

The QNAP QXP host bus adapter is required for connecting the SATA JBOD enclosure to a host

device. Third-party host bus adapters are not compatible with QNAP JBOD enclosures.

3. Connect the expansion units to the NAS.

Note

This image shows connecting the TVS-h874T to the TL-R400S JBOD enclosures.

4. Power on the SATA JBOD expansion units.

5. Power on the NAS.

TVS-hx74T User Guide

Installation and Configuration

Summary of Contents for TVS-h 74t Series








































































Search results

Summary of Contents for TVS-h 74t Series

Reviews:

Related manuals for TVS-h 74t Series

Brands by name

Popular brands

QNAP TVS-h 74t Series, User Manual

Search results

Summary of Contents for TVS-h 74t Series

Reviews:

Related manuals for TVS-h 74t Series

Brands by name

Popular brands