QNAP TS-101 Turbo Station User Manual Download Page 93

Page: 93 / 163

3.8.4

System Update

Note:

If the system is running properly, you do not need to update the

firmware.

Before updating system firmware, please make sure the product model and
firmware version are correct. Follow the steps below to update firmware:

Step 1:

Download the release notes of the same version as the firmware from

QNAP website

http://www.qnap.com

. Read the release notes carefully to make

sure you need to upgrade the firmware.

Step 2:

Before upgrading system firmware, back up all disk data on the server to

avoid any potential data loss during system update.

Step 3:

Click the [Browse…] button to select the correct firmware image for

system update. Click

Update System

to update the firmware.

Note:

System update may take tens of seconds to several minutes to complete

depending on the network connection status. Please wait patiently. The system
will inform you when system update is completed.

Summary of Contents for TS-101 Turbo Station



































































































































































Search results

Summary of Contents for TS-101 Turbo Station

Reviews:

Related manuals for TS-101 Turbo Station

Brands by name

Popular brands

QNAP TS-101 Turbo Station, User Manual

Search results

Summary of Contents for TS-101 Turbo Station

Reviews:

Related manuals for TS-101 Turbo Station

Brands by name

Popular brands